ORIGINAL RESEARCH ARTICLE: Performance and emission characteristics of Baobab (Adansonia Digitata) bio-lubricant in four stroke spark ignition engine

Muhammad S. Haruna(1), Hafizu I. Hassan(2), Muhammad U. Kaisan(3), Hauwa Ndagi(4),


(1) 
(2) 
(3) 
(4) 
Corresponding Author

Abstract


Over the years, the growing interest for bio-based alternatives to mineral products (i.e. fuel and lubricant) to save energy and improve environmental friendliness has become one of the most researched topics. According to world meteorological organization (WMO), Concentration of carbon dioxide (CO2) reached 420.23 parts per million in April, 2022. In this research, the extract from baobab nuts was purified, degummed and epoxidized to form Bio-lubricant. The physicochemical properties of the formed bio-lubricants were determined and are within the index of American Society for Testing and Materials (ASTM). The Fourier Transform Infrared (FTIR) at different temperatures and Gas Chromatography Mass Spectroscopy (GC-MS) with two different acids were conducted on the products. The results depicted minimal changes with repeated oxidation at higher temperature and different acids respectively. A four-stroke spark ignition engine at three different speeds was used to validate the bio-lubricant by compared with SAE40 performances. Four engine parameters considered: specific fuel consumption (SFC), brake thermal efficiency, brake power and brake mean effective pressure. The bio-lubricant maintained a low values trend for the four parameters at engine speeds of 2000rpm, 2500rpm and 3000rpm with exception of brake thermal efficiency that depicts high value of 56% at both 2000rpm and 3000rpm. The SI engine lubricated with SAE40 has higher CO, HC and CO2 emissions.


Keywords


Baobab Bio-lubricant, Engine performance and exhaust emission

References


Attia NK, El-Mekkawi SA, Elardy OA, & Abdelkader EA (2020). Chemical and rheological assessment of produced biolubricants from different vegetable oils. Fuel, 271, 117578. https://doi.org/10.1016/j.fuel.2020.117578

Dandajeh HA & Ahmadu TO (2019). Engine Performance of a Gardener Compression Ignition Engine using Rapeseed Methyl

Esther. FUOYE Journal of Engineering and Technology, 4(2), 126130. https://doi.org/10.46792/fuoyejet.v4i2.325

Encinar JM, Nogales-Delgado S, Snchez N, & Gonzlez JF (2020). Biolubricants from rapeseed and castor oil transesterification by using titanium isopropoxide as a catalyst: Production and characterization. Catalysts, 10(4), 366. https://doi.org/10.3390/catal10040366

Girish AR & Shashidhara YM (2021). Study on Performance and Emission Characteristics of Four stroke Gasoline engine under Formulated Neem oil as base lubricant. IOP Conference Series: Materials Science and Engineering, 1189(1), 012014. https://doi.org/10.1088/1757-899X/1189/1/012014

Goud VV, Patwardhan AV, & Pradhan NC (2006). Studies on the epoxidation of mahua oil (Madhumica indica) by hydrogen peroxide. Bioresource Technology, 97(12), 13651371. https://doi.org/10.1016/J.BIORTECH.2005.07.004

Hassan NAA, Fauzi SHM, & Kian YS (2018). Potential of Palm Oil Waste for Biolubricant. Palm Oil Development, 68, 1821.

Kaisan MU, Anafi FO, Nuszkowski J, Kulla DM, & Umaru S (2017). Exhaust emissions of biodiesel binary and multi-blends from Cotton, Jatropha and Neem oil from stationary multi cylinder CI engine. Transportation Research Part D: Transport and Environment, 53, 403414.

https://doi.org/10.1016/J.TRD.2017.04.040

Krishna RKSV, Naval K, Umesh K, & Vijayakumar T (2014). Experimental investigation on usage of palm oil as a lubricant to substitute mineral oil in CI engines. Hindawi Publishing Corporation Chinese Journal of Engineering Volume, Article ID 643521, 5 pages.

Lathi P & Mattiasson B (2007). Green approach for the preparation of biodegradable lubricant base stock from epoxidized vegetable oil. Applied Catalysis B: Environmental, 69, 207212. https://doi.org/10.1016/j.apcatb.2006.06.016

Nomde-Martyr N, Bilas P, Bercion Y, & Thomas P (2021). Moringa and Graphite as Additives to Conventional Petroleum-Based Lubricants. Lubricants 2021, Vol. 9, Page 65, 9(7), 65. https://doi.org/10.3390/LUBRICANTS9070065

Samuel Gemsprim M, Babu N, & Udhayakumar S (2020). Tribological evaluation of vegetable oil-based lubricant blends. Materials Today: Proceedings, 37(Part 2), 26602665. https://doi.org/10.1016/j.matpr.2020.08.521

Srivastava A & Sahai P (2013). Vegetable oils as lube basestocks: A review. African Journal of Biotechnology, 12(9), 880891. https://doi.org/10.4314/ajb.v12i9.

Syahir AZ, Zulkifli NWM, Masjuki HH, Kalam MA, Alabdulkarem A, Gulzar M, Khuong LS, & Harith MH (2017). A review on bio-based lubricants and their applications. Journal of Cleaner Production, 168, 9971016. https://doi.org/10.1016/j.jclepro.2017.09.106

Thapliyal P & Thakre GD (2017). Correlation Study of Physicochemical, Rheological, and Tribological Parameters of Engine Oils. Advances in Tribology, 2017, 1257607. https://doi.org/10.1155/2017/1257607

Zainal NA, Zulki NWM, Gulzar M, & Masjuki HH (2018). A review on the chemistry , production , and technological potential of bio- based lubricants. 82(June 2017), 80102. https://doi.org/10.1016/j.rser.2017.09.004


Full Text: PDF

Article Metrics

Abstract View : 192 times
PDF Download : 97 times

DOI: 10.57046/CXVW9649

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Proceedings of the Nigerian Academy of Science

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.