Mathematical modelling and virtual design of metamaterials for reducing noise and vibration in built-up structures
), Anselm O. Oyem(2), Olayiwola I. Babarinsa(3),
(1) Federal University Lokoja, Kogi State
(2) Federal University, Lokoja
(3) Federal Unviersity Lokoja
Corresponding Author
Abstract
Noise and vibration pose significant challenges in built-up structures, affecting structural integrity and occupant comfort. Traditional materials often fail to address these issues effectively across all relevant frequencies, particularly in urban and industrial environments. This paper presents a mathematical modeling approach and virtual design framework for developing metamaterials specifically tailored to mitigate noise and vibration in built-up structures. By leveraging finite element analysis, dynamic energy analysis, and optimization algorithms, the study demonstrates how metamaterials can create frequency-specific barriers. Comparative analyses with previous studies, performance metrics, and sensitivity evaluations reveal the robustness and unique contributions of this approach. Validation through simulations and benchmarking confirms the model’s effectiveness, enhancing structural resilience and human comfort in complex environments. Additionally, this study surveys natural metamaterials and the urban environment. The major findings highlight the effectiveness of natural metamaterials (NMs) in ground vibration attenuation, offering diverse applications and proposing a roadmap for developing natural materials for clean and quiet environments.
Keywords
References
Abusag NM & Chappell DJ (2016). On sparse reconstructions in near-field acoustic holography using the method of superposition. Journal of Computational Acoustics 24, 03, 1650009.
Aumann Q, Miksch M, & M¨uller G (2019). Parametric model order reduction for acoustic metamaterials based on local thickness variations. Journal of Physics: Conference Series 1264.
Bajars J, Chappell D, Søndergaard N, & Tanner G (2020). Computing high-frequency wave energy distributions in two and three dimensions using discrete flow mapping.
Bajars J & Chappell DJ (2020). Modelling uncertainties in phase-space boundary integral models of ray propagation. Communications in Nonlinear Science and Numerical Simulation 80, 104973.
Bopp M & Albers A (2023). Vibroacoustic metamaterials as add-on solution for noise reduction in existing housing structures. In INTER-NOISE and NOISE-CON Congress and Conference Proceedings, vol. 265, Institute of Noise Control Engineering, pp. 4420–4430.
Cavaliere F, Zlotnik S, Sevilla R, Larr´ayoz X, & D´ıez P (2022). Nonintrusive parametric nvh study of a vehicle body structure. Mechanics Based Design of Structures and Machines 51, 6557 – 6582.
Cerniauskas G, Sadia H, & Alam P (2024). Machine intelligence in metamaterials design: a review. Oxford Open Materials Science 4, 1, itae001.
Chai W & Feng M (1997). Vibration control of super tall buildings subjected to wind loads. International Journal of Non-linear Mechanics 32, 657–668.
Chappell D & Abusag N (2017). The method of superposition for near-field acoustic holography in a semi-anechoic chamber. Integral Methods in Science and Engineering, Volume 2: Practical Applications, 21–29.
Chappell D, Crofts JJ, Richter M, & Tanne G (2021). A direction preserving discretization for computing phase-space densities. SIAM Journal on Scientific Computing 43, 4, B884–B906.
Chappell D, Harris P, Henwood D, & Chakrabarti R (2006). A stable boundary element method for modeling transient acoustic radiation. The Journal of the Acoustical Society of America 120, 1, 74–80.
Chappell DJ & Tanner G (2014). A boundary integral formalism for stochastic ray tracing in billiards. Chaos: An Interdisciplinary Journal of Nonlinear Science 24, 4.
Chappell DJ & Tanner G (2019) Uncertainty quantification for phase-space boundary integral models of ray propagation. Wave Motion 87, 151–165.
Du J & Olhoff N (2007). Minimization of sound radiation from vibrating bimaterial structures using topology optimization. Structural and Multidisciplinary Optimization 33, 305–321.
Hartmann T, Morita S, Tanner G, & Chappell DJ (2019). High frequency structure-and air-borne sound transmission for a tractor model using dynamical energy analysis. Wave Motion 87, 132–150.
Hedayati R & Lakshmanan SP (2024). Active acoustic metamaterial based on Helmholtz resonators to absorb broadband low-frequency noise. Materials 17, 4, 962.
Ichchou M & Kacem AA (2008). Reduced models for elastoacoustic problems with intelligent interfaces. Journal of the Acoustical Society of America 123, 3573–3573.
Ji J, Luo Q, & Ye K (2021). Vibration control-based metamaterials and origami structures: A state-of-the-art review. Mechanical Systems and Signal Processing 161, 107945.
Keane A (1995). Passive vibration control via unusual geometries: the application of genetic algorithm optimization to structural design. Journal of Sound and Vibration 185, 441–453.
Khot S, Yelve NP, & Nair R (2012). Simulation study of active vibration control of cantilever beam by using state and output feedback control laws.
Khot S, Yelve NP, Tomar R, Desai S, & Vittal S (2012). Active vibration control of cantilever beam by using pid based output feedback controller. Journal of Vibration and Control 18, 366 – 372.
Martin R (2018). A numerical simulation of neural fields on curved geometries. Journal of computational neuroscience 45, 133–145.
Mittermeier F, Schauer J, Miksch M, & M¨uller G (2019). Numerical investigation of the potential of tailored inclusions as noise reduction measures. Journal of Physics: Conference Series 1264.
Mohammed N, Creagh S, Tanner G, & Chappell D (2018). Tunnelling corrections to wave transmissions on shell structures.
Nash L, Kleckner D, Read A, Vitelli V, Turner A, & Irvine W (2015). Topological mechanics of gyroscopic metamaterials. Proceedings of the National Academy of Sciences 112, 14495 – 14500.
Ohayon R & Soize C (2001). Structural acoustics and vibration. The Journal of the Acoustical Society of America 109, 2545–2546.
Qahtan AS, Huang J, Amran M, Qader DN, Fediuk R, & Wael AD (2022). Seismic composite metamaterial: a review. Journal of Composites Science 6, 11, 348.
Qin H & Yang D (2019). Vibration reduction design method of metamaterials with negative poisson’s ratio. Journal of Materials Science 54, 14038 – 14054.
Richter M, Chappell D, & Tanner G (2020). Dynamical energy analysis: high-frequency vibrational excitation of real-world structures. PROCEEDINGS OF ISMA2020 AND USD2020, pages 1711 -1720.
Richter M & Chappell DJ (2015). Convergence of ray-based methods using transfer operators in different bases.
Rowbottom J & Chappell DJ (2021). On hybrid convolution quadrature approaches for modeling time-domain wave problems with broadband frequency content. International Journal for Numerical Methods in Engineering 122, 24, 7581–7608.
Rowbottom J & Chappell DJ (2022). A numerical study of the convergence of two hybrid convolution quadrature schemes for broadband wave problems. In Integral Methods in Science and Engineering. pp. 291–305.
Saxena A, Tsakonas C, Chappell D, Cheung CS, Edwards AMJ, Liang H, Sage IC, & Brown CV (2021). Static and dynamic optical analysis of micro wrinkle formation on a liquid surface. Micromachines 12, 12, 1583.
Slipantschuk J, Richter M, Chappell DJ, Tanner G, Just W, & Bandtlow OF (2020). Transfer operator approach to raytracing in circular domains. Nonlinearity 33, 11, 5773.
Søndergaard N & Chappell DJ (2016). Ray and wave scattering in smoothly curved thin shell cylindrical ridges. Journal of Sound and Vibration 377, 155–168.
Tamber JS, Chappell DJ, Poore JC, & Tranter MR (2024) Detecting delamination via nonlinear wave scattering in a bonded elastic bar. Nonlinear Dynamics 112, 1, 23–33.
Tandon N (2000). Noise-reducing designs of machines and structures. Sadhana 25, 331–339.
Tanner G, Chappell D, Hamdin HB, Giani S, Seidel C, & Vogel F (2010). Acoustic energy distribution in multi-component structures-dynamical energy analysis versus numerically exact results.
Tanner G, Chappell D, L¨ockel D, Søndergaard N, & Vogel F (2012). Dynamical energy analysis on fem grids–a new tool for describing the vibro-acoustic response of car-body parts.
Vaˇsut S, Bris P, & Pon´ıˇzil P (2001). Mathematical model for the design of layered structures to provide vibration and impact damping. Building Acoustics 8, 25 – 39.
Ventsel E, Krauthammer T, & Carrera E (2002). Thin plates and shells: theory, analysis, and applications. Appl. Mech. Rev. 55, 4, B72–B73.
Yang D (2021). Ship vibration and noise reduction with metamaterial structures. In Practical Design of Ships and Other Floating Structures: Proceedings of the 14th International Symposium, PRADS 2019, September 22-26, 2019, Yokohama, Japan-Volume II 14, Springer, pp. 377–386.
Zhang L & Sheng X (2022). A review on the research progress of mechanical meta-structures and their applications in rail transit. Intelligent Transportation Infrastructure.
Article Metrics
Abstract View
: 45 times
Download : 12 times
DOI: 10.57046/GCKT2546
Refbacks
- There are currently no refbacks.
Copyright (c) 2025 Proceedings of the Nigerian Academy of Science
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
.png)